BLOCK JOINTING MORTAR
V-BOND-AAC BLOCK JOINTING MORTAR is a ready to mix and use, self-curing cementitious mortar for laying of AAC, CLC bricks, hollow concrete blocks and bricks. It’s a factory-made dry mixed mortar blended with carefully selected raw materials such as graded sand, mineral binders and ordinary Portland cement (OPC) in combination with selected polymeric additives which help in providing mechanical bond and adhesion between block and block to a surface. Designed for use with water to produce high strength thixotropic mortar that meet and exceed the requirements of National and International Standards.
Applications
Designed for internal floor & wall applications
Advantages
- High Strength
- Self Curing, Impact resistant &vibration resistant
- Flexible & Improved Workability
- Long working time
- Construction Accuracy
- Fast Construction and Higher Productivity
- Withstand Hammering and Chiseling
- Improved adhesion between two blocks
- Economical
Suitable For
- Highly Suitable to AAC Blocks
- Cement mortar blocks & bricks
- Concrete hollow blocks
- Fly ash made bricks
Technical Data
PARAMETERS | SPECIFICATIONS |
---|---|
Appearance | Grey, Coarse and free flowing Material |
Application Thickness | 3 – 4 mm |
Pot Life | 3-4 hrs |
Time for Hard Dry | 24 Hrs |
Curing | Not required |
Compressive Strength | > 5.0 MPa(ASTM C 1660) |
Split Tensile Adhesion Strength | > 0.34 MPa(ASTM C 1660) |
Coverage | 160 – 180 sft. / 50 kg @ 3 – 4 mm thickness for 100 blocks Vary on Surface and absorption of blocks |
Packaging
50 Kg Bag
Shelf Life
Factory sealed bag of this product is guaranteed for first quality for 6 Months * if stored up in dry area.
FAQs
It is a block jointing mortar for the internal and external wall of AAC blocks, CLC blocks, hollow concrete blocks, and bricks.
Thin jointing (2-3mm), Quantity required is 75% less than the conventional mortar, Time-saving, Easy application, No curing required, Eco-friendly, less manpower
Thinner jointing with high adhesion gives better quality, Factory-made product with consistent quality, No water curing is required at the site, Ready to use, Better bond than conventional cement-based mortar
One can get 160-180 sq.ft. on coverage per 50 kg bag when used with 3-4 thickness for 100 blocks of 4”.
One should mix approximately 15 ltr of water for 50 kg bag.